Windmill
You new aluminum windmill should last for many years with very little maintenance. Here are the steps to putting it together, along with some tips and photos. There are instructions included with the windmill, start by reading the included instructions. This series of instructions, tips and photos are meant to clarify the instructions that come [...]
Continue reading about Aluminum Windmill Assembly Getting Started
The mast head on all of the aluminum windmills has straight sides. (see the photos below) The legs spread out at an angle from the mast head. It is important to only put the bolts in about half-way through the mast head and into the nut sets which are on the top of the legs. [...]
Continue reading about Aluminum Windmill – getting the mast head right is the key
Here is a quick tip that applies to all of the aluminum windmills. Most of us are used to working with steel – when you bolt things together that are made of steel you want to get the bolts really tight. If you do not; the bolts will work loose. Even with the tiny bolts [...]
Here is some information and photos about the 18 foot aluminum windmill received from a customer. We are in the ground and rock solid. Overall we are very pleased. ASSEMBLY – 3 hours with 2 people – instructions were pretty good but some common sense is required – no missing bolts or parts, everything was [...]
free online store
Continue reading about The aluminum windmills have been added to eCrater
Here is short video about the windmills that I “put together” after taking Bob the Teacher Simple 3 Video Velocity on line class this weekend.
Continue reading about I did this video after taking the Video Velocity Class
Press Play To Discover The SIMPLE Formula Missing From Your Business…
Continue reading about Simple 3 Video Velocity was a great On line class
Turn the tail over, remove the Post-It tabs and place them on the other side flush with the edge of the tail. Apply the Yellow Pin Stripe Vinyl. Remove the Post-It tabs and trim the edges with a razor blade or Box Knife NEXT STEP
Continue reading about 8 Foot Aluminum Windmill – Green with Yellow Trim – 4
Next place the Post-it tab (you can reuse these on the back side and tail) on the tail lining up with the edge – pull the backing off from the yellow pin stripe trim and line it up with the Post-It notes on the tail. Press the trim down on the green vinyl, remove the [...]
Continue reading about 8 Foot Aluminum Windmill – Green with Yellow Trim – 3
When you have finished putting the yellow trim on one side of the blades, turn the wheel over, remove the Post-It Tabs and place them on the other side of the wheel, pull off an inch or so of the protective backing and stick the trim on the green vinyl again lining up the edge [...]
Continue reading about 8 Foot Aluminum Windmill – Green with Yellow Trim – 2
Facebook
LinkedIn
Flickr
Twitter
Youtube