Putting the mini 17″ windmill together – Part 1

Putting the 17″ mini windmill together.  It comes in a 14X6X2 in box.  First take out all of the parts and spread them out.   The nuts and bolts are very small.  If you are putting this together in an area with a carpet, you might want to put a sheet down over the carpet.  Some of the nuts and bolts will end up on the floor.  You will need to use the FREE screwdriver that I have added to the windmill kit for you.  You might need a small needle nosed pliers.  Something that you may find to be very useful is some wide masking tape.  Wrap the tape around a finger sticky side out this will allow you to pick up and place the nuts so you can get the bolts started.  NEXT STEP

Tags: 17 in windmill, mini windmill, table top windmill